First of all, it is strongly excluded to use Chinese browsers such as 360 and QQ to download things from our website! Files downloaded in such a browser environment will be added something, and it is strongly recommended that the computer do not install rogue software such as 360! Please use the built-in Edge or […]
If you setup SL04 box have any problem, please take a closer look at this post, especially if the computer has a built-in network card, basically you will encounter IP How to plan these problems, please read this description carefully. Note: All the functions of our box have been verified, the box will be strictly
Customers in China, Hong Kong and Taiwan can send us back for upgrades (the shipping cost is cheaper than abroad, you can send it back, and we upgrade the insurance). Or wait for us to write the upgrade program will announce the upgrade method, the time will be longer, self-upgrade needs to be disassembled, short
The maximum refresh rate of dmx512 is 44Hz, when sending Artnet data in MA2, if delay set to 0 ms, there no interval between packets, the maximum refresh rate of DMX512 will be exceeded, causing the lights to flicker occasionally. solution: In the Artnet settings, the delay time is set to at least 1ms. This
The SL04 box with 5.1 firmware, when controlled actual light, please connect to the computer through the LAN port, we find that when the USB virtual network card is connected to the computer, there is a bug when transmitting big data, please wait for us to fix this bug. The firmware upgrade method, we will
DATE: December 23, 2024 START TIME: 9:30 AM Los Angeles Time (PST) END TIME: 2:30 PM Los Angeles Time (PST) During this time, server will power off, you will not be able to browse our website and you will not be able to activate your license through GetHWID. Don’t worry, please waiting for 5 hours,
If the computer has multiple network cards such as built-in network cards, please pay attention to the following when registering SL04: The priority of the built-in network card is higher than that of our SL04 box virtual USB network card, if the built-in network card is set to the IP of the 2.x.x.x network segment,
The built-in http server of the SL04 box is completely independently developed by ourselves, and does not call any third-party libraries. SL04 MCU memory and flash size are very small, in order to improve the MCU processing speed and reduce the size of the program, the written http service code uses a lot of skills,
Theoretical knowledge: Because Artnet generally uses broadcast for polling transmission, the bandwidth requirements are very high, For example, if MA2 opens all 256 domains, Ideally, the bandwidth required is 256 x (530 + 42) x 8 x 33 = 38658048, the minimum requirement is 38Mbit bandwidth, and in fact there are other data transmitted on
Other software and new versions will be updated, so please look forward to it. Click Update Service Download
If you forget the IP address of the SL04 box, SL04_ToFactory this software can find the IP address of the box, and can also restore the box to the factory settings, no matter which network segment the IP of the SL04 box is set to, you can restore to the factory default IP=2.0.0.44 How to
If your computer has multiple network cards, MA2 will most likely give priority to outputting Artnet data to the network card of the computer itself, and will not output to the USB network card of the SL04 box. If you copy our DLL plug-in to unlock 131072 parameters, but MA2 does not unlock so much,
If the network card IP has been set to a fixed IP, and be able to ping through the box, but you can’t get into the box WebAPP, Basically, it can be determined that it’s a browser problem, please follow the steps below to clear the browser cache and Cookie, then you can enter the
Download link: http://down.hahan123.com/down_server/SuperLightBox/ Today uploaded the latest plugins for DasLight4, DasLight5, myDMX5, SweetLight, ShowXpress and other software,Note: These plugins can support multiple recent versions, maybe the versions that have not yet been released are also supported, so if there is a new version of the official download, these plugins may also be supported. How to
The first time you use the SL04 box, you need to activate it before you can use it. Note! Note! Note! Important! SL04 activation can only be activated through the Type-C interface of the USB data cable link box, and must not be activated through the LAN port. In the unlikely event that the activation
First use SL04 box, LAN card setup method: http://www.hahan123.com/sl04/net_set_en.html
Important: 1: If you have run other software with our plug-in, when using MA2 onPC, you must restart SL04 box once, because when running other software, other software will recognize that it is not MA onPC software, and will temporarily close the MA2-Net protocol of the box to save the cpu processing speed of the
Details link: http://hahan123.com/sl04/ SL04 box supports Artnet, sACN, hahan, MA2-NET lighting network protocols Native support for MA2 onPC software, no need to crack, official download MA2 onPC can be used directly, like as the original equipment support RDM support offline capture, playback and call support DMXin, support DMXin->Artnet transfer to 3D or control software support
