Notes: Our SL04 box is equivalent to the MA3 official VIZ Key box, but the software has 8 universe unlocked (8×512=4096 parameters), and the hardware has 4 universe 2048 outputs. It is also possible to take our 2 boxes and combine 8 universe with 4096 parameters hardware outputs. Notes: 1: There is no need to […]
The email sent to you bounced and we were unable to reach you. Please contact us by other email like Gmail.
Whether the SL04 box is connected to a USB network card or a LAN network card, when setting the fixed IP of the network card, please set the mask to: 255.255.255.0, do not set it to 255.0.0.0 If you’re not sure what this setting does, don’t expand the segment and set it to the default
10 years ago, we let us HD512 box support MA2 at a civilian price, achieved a large number of MA2 lighting engineers in China, set off a wave of learning MA2 climax, at that time the QQ group was close to 2000 people, very active, hundreds of messages if you were not careful. Today we
Depence is a well-known 3D software, which supports external consoles or MA2 and other software to control stage lamps, fountains, flamethrowers and other equipment in Depence, and can also make dmx programs in the software itself to control 3D lamps and other equipment. SL04 natively supports Depence, supports Depence itself to output dmx to SL04
When the mobile phone fast charging source adapter is connected to the SL04 box and used offline, you need to pay attention to the following matters: 1: SL04 box with internal isolation, in order to isolate the output, there is a 5V to 5V power isolation chip, the normal voltage input range fluctuates to +-10%,
Please note: HD512 was discontinued last year, there are still many customers looking for this old box, HD512 has been discontinued for a long time, there is no longer one on the market, the replacement product is SL04 box, SL04 box is more powerful, 4 port output, only 10 dollars more expensive, please update to
Official page: https://www.lumidesk.com/ Some customers like the LumiDesk software very much, let me upgrade to support this software, the official does not seem to be upgrading anymore, the last version is [May 25 2021]. The plugin has just been developed and has not been carefully tested, so please let us know if you find any
Sorry, only Chinese. Watch on this site (54 minutes, speed is slow): http://down.hahan123.com/down_server/SuperLightBox/video_teaching/02_RS485_Call.mp4 Watch on Bilibili (54 minutes, speed is fast) https://www.bilibili.com/video/BV1nLAZefEYn/ This video simulates a centralized control system and demonstrates how an external device can call the SL04 box via RS485/232. It demonstrates the call of the dmx offline file in the SL04 box
C# source code download link: http://down.hahan123.com/down_server/SuperLightBox/SDK_Source_code/examlpe
Many people ask me how can remotely control the SL04 box, And how is the large screen master control system written, I will now provide the demonstration source code of the SL04 box to you for your reference, This WebAPP is called through the API inside the SL04 box, So as to achieve the control
Many customers don’t use our hahan RAW protocol to send data to SL04 box for development, so for the convenience of customers, we encapsulate complex things into a function: DMXSendUniverse(char *ip, unsigned char universe, unsigned char* buf); In your code you just need to include our SL04.h header file, and then call DMXSendUniverse(char *ip, unsigned
ETC website: http://www.etcconnect.com Our SL04 box can unlock the Eos control software 63999 universe, a total of 32767488 channels, using the standard sACN protocol output, so the sACN protocol of Eos cannot be turned off. The sACN protocol is enabled by default in Eos software, if it is turned off, it can be opened in
Several customers in Taiwan asked me to support ETC software, which has been cracked successfully, but there is a small problem, the checkbox of Settings->Network->sACN of ETC software has been canceled, but it will still output sACN data to the network, it is not clear why this setting does not work, because the official sACN
There are many customers who do LED lighting projects and they like this software, ask me for support these software. This plugin has just been developed and has not been carefully tested, if you find any bugs, please let us know. Click Update Service Download
GetHWID Upgrade Method: New customers can ignore this upgrade instruction and just do the trick. Old customers, you need to re-run GetHWID, enter your original activation code, GetHWID will re-get the new winusb.dll and ma2_key.lic files, re-copy the winusb.dll file in the unlimite_key directory to the 3.9.60.98 directory, if you forget the activation code, you
There are a lot of customers who really like the old Daslight software and ask me to upgrade to support it. These plugins have just been developed and have not been carefully tested, so please let me know if you find any bugs. Click Update Service Download
Notice: MA2 released the new version 3.9.60.89 on 2025-01-14, the new version has a little change in encryption, we will upgrade in these two days, if you use GetHWID and SL04 boxes, please wait for our update notice. We’ll let you know when we release it, here’s how to upgrade: GetHWID upgrade method: Re-run GetHWID,
